Keytars & AX Synths

Using earphones as monitors?

Using earphones as monitors?

10 Nov 2009, 11:32
I am still intent on buying an AX-Synth but I would like to know if using head/earphones with the synth will cause audio from the main outputs to be cut? I currently use earphones as monitors with my current setup and it's something I'd rather not be without if I were to get the AX.

Thanks.

Re: Using earphones as monitors?

10 Nov 2009, 12:55
No, the headphones and line output are independent, so audio always goes out from both at the same time.

Re: Using earphones as monitors?

11 Nov 2009, 17:28
there might be some volume issues, because you should run your synth pretty hot to the PA (to get the best noise-audio-ratio) and if you go with full volume out of your synth, your headphones will be damn loud aswell...

Re: Using earphones as monitors?

12 Nov 2009, 03:10
Thanks guys, I might get some sort of in-line volume control for the earphones if the output is that high. Or maybe use the attenuator to make the balance a little better.

Re: Using earphones as monitors?

14 Nov 2009, 04:48
in-line control sounds a great idea! That Attenuator however might not because it affects only to main outputs and actually lowers the signal volume...

Re: Using earphones as monitors?

20 Nov 2009, 19:44
The best solution I have come across for live performance using head phones or in-ear monitors is to buy yourself a small mixer. I currently use a 12 channel Mackie because I use four keyboards live. Most, if not all mixers have an independant output with a proprietary attenuation for that output.

← Back to Keytars & AX Synths