Hey Telmo... you are going to have to copy your samples from CF1 to your "User" area. Then copy insert CF2 and copy the samples from the "user" area to your CF2. I recently figured out how to move samples and other info from the card to the user area and vise versa. Below is the last post in that thread that mentions the keystrokes... Good luck !!
Randy
Hey ya'll after spending some time "hacking" I figured it out !! it's not 'SHIFT/LEFT ARROW/ENTER" it's, select the User performance set up you want to copy to your card, then push 'SHIFT/RIGHT ARROW/ENTER". Then it goes from Performance list to Performance write mode. From here push the "RIGHT ARROW" key to go from the User area to the Card area, then push "ENTER". It will then prompt you "Are You Sure?", push "ENTER". Your performance set up was just copied to your card.
It's to bad the Fantom Librarian software can't access the card memory locations. If it could, you would be able to copy/paste everything to the card instead of keystroke after keystroke on the XR's front panel. To bad there's not a "monitor out" port on the back where all the menus and submenus could be shown at once. Sure would take the "guess" work out of "where that parameter is located".
Oh by the way, after posting I saw Phil's suggestion. He was right !! Props to Phil !! I should read my posts before continuing to "hack".
Randy
www.finalstage.com
→ Reply → Edit