Fantom-G

Skipped OS update

Skipped OS update

13 Aug 2009, 15:35
Just wondering if I'm missing updates and functions if I skipped the 1.20 OS update and went right to the 1.30 OS update?

Thanks for any info,
Pauliekeys

Re: Skipped OS update

13 Aug 2009, 15:42
No, the updates are incremental, so the last one has all improvements and features from the previous one.

Re: Skipped OS update

14 Aug 2009, 04:45
Artemiy is correct but the term incremental means the exact opposite: only containing what is new or changed compared to the previous version (as in for example incremental backup).

I'm not completely sure what the best term would be but it's probably self-contained or perhaps all-inclusive or even non-incremental.
http://www.youtube.com/watch?v=TXz0UkVBZPQ
TOYZ in 60 seconds (short live video of my progrock band on YouTube)

Re: Skipped OS update

14 Aug 2009, 12:33
"Comprehensive" would be a good one. =)

Enjoy 1.3, it's a major jump forward!

Re: Skipped OS update

14 Aug 2009, 14:58
I think that technically an OS update (at least like the one performed inside the Fantom-G) concerns burning data on a Flash memory chip. If I'm not mistaken, we're talking about EEPROM chips here. This stands for Electrically Erasable Programmable Read Oonly Memory. So, every time an OS update takes place, all data has to be deleted, so that the chip is erased and filled up with the new data. That's why every update contains ALL necessary data from scratch, without having to rely on previous OS versions.

All said, I don't know if it is right to update, say from 1.03 straight to 1.30. If I had to do that, probably I would perform every update, just in case.

Re: Skipped OS update

17 Aug 2009, 05:50
That's why every update contains ALL necessary data from scratch, without having to rely on previous OS versions.
Not necessarily. In principal it would be possible for an update procedure to first extract the original OS from the EEPROM (or whatever medium its held in) into RAM (or the USB stick or some other temporary medium), patch it with the content of the update file and then write back the result into the EEPROM.

So even though the EEPROM is completely rewritten, the data that is used to rewrite it may be generated from the original contents together with the update contents.

Just for the records I will repeat: the Fantom updates seem to be self-contained. As long as Roland does not specifically instruct to update to each version sequentially
I would not hesitate to go straight to the latest version.
http://www.youtube.com/watch?v=TXz0UkVBZPQ
TOYZ in 60 seconds (short live video of my progrock band on YouTube)

← Back to Fantom-G