Fantom-G

No midi

Hi all,
Whatever I do, it seems that my sequencer softare ( Cakewalk Sonar 6) does not respond to Midi from my Fantom G.
The editor software works fine (via USB) - so I think that the Fantom G midi driver works fine.
I can choose this Fantom G driver in my midi settings of Sonar, but no reaction.
I tried via USB or MIDI in/out connectors without succes.
What do I do wrong ?
Thx

Re: No midi

13 Aug 2009, 07:50
Just making sure:

In Fantom G, do you have 'your cursor' on an External channel in Studio Mode External Mixer, or yellow dot activated in Live mode on External and thus sending out MIDI to External?
Jesse J / The Fantom G Facebook group - Please join!

Re: No midi

13 Aug 2009, 08:47
Yes I hit this problem as well... it seems that in Single/Studio modes, by default there is no MIDI data transmitted, you have to explicitly turn on whichever MIDI channels you want to transmit:

• Press [PAD MODE], and then press pad [10] (MIDI TX SW).
• Pressing pads [1]–[16] will switch external MIDI transmit channels 1–16 on/off.
• Each pad will be lit when transmission is on, or dark when it is off.

Rick

---
[Fantom G6] [Fantom-S61 + SRX01/07/09] [SH-201] [JP-8000] [D-50] [D-5]

Widow's Walk ~ http://www.widowswalk.ca ~ http://www.myspace.com/widowswalkprog

← Back to Fantom-G