Fantom-G

Sequencer messed up in 1.3? NO! Solved

Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 04:26
Hi all,

yesterday I was working with the sequencer for the first time since upgrade to 1.3. Some strange things occurred:

1). Phrase editing-erase: I wanted to erase 2 bars from a phrase but it did not erase at all.... What really happened: The display was not showing the erase-action, though the bars were erased..... to get rid of the "false" display I had to delete those two bars

2).Quantizing: Same here, quantizing did occurr but I got double notes where corrected (did not sound at all but were still displayed)

3). Record cancel: After recoring I pressed the cancel-option undo recordings, and all of the sudden my phrases got two bars longer.

So my question is: Are more of you experiencing this of is my machine just messed-up????

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 04:29
MrBoity: check if there is one or more phrases that go beyond (=before or after) these two bars you're about to delete. I think that if there is a 4 bar phrase and you want to delete bars 2 and 3 from the Song Utility, along with other phrases too, nothing gets deleted. You have to go into phrase edit to do this. Same goes for any other phrases. I think that this has to do with the way the phrase system is implemented.

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 04:34
Actually I was working on 1 single phrase, indeed 4 bars and wanted to erase bar 3 and 4. It did happen only the display was not showing it. I was in Phrase Edit Mode.

More annoying was the quantizing, where the quantized notes became double (one on the original position and one after quantization).

But I have to check tonight if it happens again... was just wondering if someone else did experience the same

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 04:43
Since you're trying a single phrase, go into phrase edit and edit it according to your needs. Maybe you'll need to keep an intact copy of the original phrase, so go and duplicate it and perform the edit on the original one. So if you want the original phrase some time, go and use the duplicate.

Just be aware that if you cut away one or more measures off the begining of a phrase, you'll need to shift the start point of the phrase in time inside the track, because the phrase's length has changed.

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 04:47
But I was working (in Phrase Edit Mode) on a clean new Phrase in a new song, no duplication or copies involved.

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 05:10
Ok then, you can stay there and delete the unwanted measures.

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 08:59
OK....

Make sure you understand the difference between..

Erase vs Delete :
In Song Edit:
Deleting the phrase from song just removes it from the timeline. The phrase is still present in the Phrase List.

In Phrase Edit:
Erase just erases the data within the phrase, doesn't delete bars from phrase. So a 4 bar phrase with last erased will still look like 4 bars with the last bar being empty. This is good if you want to insert a break in the last bar, and still keep it 4 bar phrase.
Delete will actually delete the bars from phrase along data. A 4 bar phrase with last bar deleted will become a 3 bar phrase.

Copy vs Duplicate:
In Song Edit:
Copy phrase in song just create a copy of the link to phrase. Copied phrase is a virtual phrase, it's just another call to the phrase, which is exact copy of the first one. Duplicate will create a new phrase with the data from the source phrase. The resulting phrase is independent of the first and has a different number.

Phrase List:
If you delete the phrase from phrase list, it will be permanently deleted. I am not sure if Fantom-G checks if the phrase is being used in any song in the project. So, before you delete a phrase from the phrase list you have to be 200% sure that it's not being used in any song... or it could be too late.

After that, see if you still think there is a problem in the sequencer.
--------------------
Fantom-G6, Motif XS6, Korg M3-m, Korg Z1, Roland MC808 and MC909.

live a musical life

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 14:56
Guys,

maybe it's not clear what was happening, so i will explain once more, step by step:
1). I recorded a complete new single phrase in a complete new song in live-mode, 4 bars
2) song edit->phrase edit->erase bar 3 and 4 (from position 3 till end)

What happened was that the eration did occur, but it was not showing it on the display (notes were still there but did not play!). Same dislay-malfunctioning during quantizing as described earlier. So I was wondering If you guys also encountered the same DISPLAY-malfunctioning or is it just my machine? Have you guys checked it?

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 15:18
Let's do this one more time:

1. if you take a sheet of paper (legal ot A4) and draw some dots on it. Then you erase some with an eraser (erase)... What size will the paper be after erasing?

2. if you take a sheet of paper (legal ot A4) and draw some dots on it. Then you cut some with scissors (delete)... What size will the paper be after erasing?

= If you want a shorter phrase, you have to use the delete function, not erase. Erase will just erase note data, keeping the phrase length intact.

3. If you still see some notes after this, maybe you really didn't delete them? Are they internal, external or exp 1 or exp 2 notes left in the phrase? Go to microscope, show ALL data and find out...

4. Could it be, that you accidentally have two phrases stacked on top of each other in the sequencer?
Jesse J / The Fantom G Facebook group - Please join!

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 15:23
Mr. Boity... was the cursor passing over those notes?
--------------------
Fantom-G6, Motif XS6, Korg M3-m, Korg Z1, Roland MC808 and MC909.

live a musical life

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 15:31
I know the difference between deleting and erasing and i was ERASING two bars out of 4, so after the erase bars 1 and 2 need to have data and 3 and 4 not, I am not deleting this but the display did still show all my data though the notes are ERASED, so I'm experiencing a DISPLAY-malfunctioning..... All internall notes (but I don't see what this has to do with it if you're editing a phrase)

"Mr. Boity... was the cursor passing over those notes?" Yes, I had selected from bar 3 to the end and display was showing this to beselected

But if you all do not have the same sympthomes must be my machine I guess... will try a system reset later, see if it happens still. Thanks for your responses, appriciated it.

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 16:06
"All internall notes (but I don't see what this has to do with it if you're editing a phrase)" -> Ha, this has everything to do with it!!!!! For some reasons in case of erase or quantize etc. by default jumps to "external" (after upgrade????)-> must select internal (where can I set that?).

Thanks guys, problem solved.

Re: Sequencer messed up in 1.3? NO! Solved

28 Jul 2009, 18:31
good! :)

You select what to view in Microscope.. With F7 and F8
It's quite handy when you get the hang of it, also see how shift reacts with the arrow buttons, inc/dec buttons and the jogwheel while editing in microscope view... it could be improved A LOT by Roland, but you can get things done already. it just feels like working with an editor from 1976 that's all.... :/
Jesse J / The Fantom G Facebook group - Please join!

Re: Sequencer messed up in 1.3? NO! Solved

29 Jul 2009, 02:08
I think I have accidentally rolled my mousewheel without noticing, and then experienced unforseen outcomings......

Actually I can find my way in the sequencer quite well, but yes, sometimes you go AAAAAAAAAAAAAAAAAAAaaaaaarhggggg when working with it.... But I'm shure in time it will be better... At least I hope so :)

← Back to Fantom-G