Fantom-G

Editor not working - midi port trouble

Editor not working - midi port trouble

2 Jul 2009, 21:02
Hi
Having updated I have tried the "new" editor and I am sorry to say - it doesn't work for me. When I select the midi in/out port the program forgets it right away, so I am not able to use the editor at all.

I tried switching back to the old editor (thank you Time Machine) and I am ablet o set the port here - but get some errors of anotger kind.

Any suggestions?

Re: Editor not working - midi port trouble

4 Jul 2009, 16:11
Make sure that your fantom driver is installed or re-install it. Then check if your port is the same as in your fantom.

Re: Editor not working - midi port trouble

4 Jul 2009, 16:47
gs-dk: Make sure that your Fantom-G's and Editor's Device IDs are set the same.
The two settings can be found:
- Fantom-G: Menu -> System -> MIDI -> Device ID
- Editor: Setup -> Setup MIDI Devices -> Fantom-G -> Device ID

Re: Editor not working - midi port trouble

5 Jul 2009, 05:10
Thanks

I will give it a try - I use two emagic interfaces (amt8) and and Fireface 400 . the problem is that I have asigned the Fantom to one of the AMT's and I am only allowed to selcect the Fireface. I will let you know how it turns out.

Once again thanks for replies!

Re: Editor not working - midi port trouble

6 Jul 2009, 16:22
Hi again

Sorry your advice hasn't helped.

I include a screenshot so you can see my problem. Every time I choose the Port 1 - top of the list (Emagic Unitor) - the port gets reset to the Port 1 (Fireface 400) at the bottom. Very strange....

I have installed a new usb driver....

I am NOt able to use the software at all then....any help out there..... Thanks!

← Back to Fantom-G