Fantom-G

Control part volume with pedal in live mode

Control part volume with pedal in live mode

21 Jun 2009, 14:15
Hi,

Is it possible, in live mode to control the volume of one part with a pedal and for an other part the modulation with the same pedal?

Most important is that I can set the volume of one part

Thx, Myxx
G7
Fantom X7
Thx, Myxx Belgium

Re: Control part volume with pedal in live mode

25 Jun 2009, 15:00
Hello, Helloooo, can someone help me please?
Fantom X7
Thx, Myxx Belgium

Re: Control part volume with pedal in live mode

25 Jun 2009, 19:05
Hi!
I could be wrong but I think you can only achieve that at PATCH level, meaning - you have to use CONTROL 1 ~ 4 configurations (PATCH EDIT) to modify the parameters you want.
This requires you to make a clone of the patches you need. Been doing that to play live... works quite well...

Regards,
Hope it helps,
LL

Re: Control part volume with pedal in live mode

1 Jul 2009, 13:03
Thx for your reaction and sorry for the late reply.
Do you mean it can only be done in single mode?


Cheers, Myxx
Fantom X7
Thx, Myxx Belgium

Re: Control part volume with pedal in live mode

1 Jul 2009, 13:18
Myxx: This means that you have to edit your sounds in Single mode, in order for them to receive one single MIDI control message (e.g. CC01 Mod wheel), and that controller will affect each part differently. So, it can be organized in Single Mode and be used in Live or Studio Mode. This has to be done because each slider, knob, pedal and switch can be assigned only to one parameter/controller.

← Back to Fantom-G