Fantom-S and Fantom-X

Using pads to program change?

Using pads to program change?

19 Feb 2004, 20:40
Just a quick wish list - I came from a Roland XP-30 and I used the quick keys ALL the time during performance to quicly change patches - but it's a real pain on the Fantom with the wheel and such - i there any way the pad can be programmed (maybe through the matrix control/CTRL setup) to issue a program change for one of the parts in performance mode?

Thanks

Re: Using pads to program change?

19 Feb 2004, 21:12
If you mean switching between the different parts of a performance, then what I usually do is:
- make sure that the cursor is positioned on the first part that you will play
- use the "down" and "up" cursor key to switch to the next patch(es).

If you mean making the same patch sound differently, try to take the same patch as different parts with different settings and switch between both parts.

The Fantomenal K
The Fantomenal K

Yep - that's the way to do it :P

20 Feb 2004, 02:39
Thanks for that - hadn't even delved into that section of the manual - but it makes sense and I've gotten it to start to work - SOOOOO many changes :P hehehehe .. sooo many numbers to input .. but it'll be worth it .. wow this thing has so much more power than you'd ever know

... (and you guys are better than a manual will ever be :P)

Thanks again

Re: Using pads to program change?

10 Mar 2004, 18:27
"You could save SysEx messages in patterns and then assign them to RPS on the pads"
can you explain more about this. i didn't understand quite well. maybe with an example?

thanks
-----------------------------------------------
check out my tunes
http://www.soundclick.com/bands/4/ionospheremusic.htm

← Back to Fantom-S and Fantom-X