JUNO-G

Juno G Screen Clarity/Quality

Re: Juno G Screen Clarity/Quality

8 Aug 2008, 05:32
I think the problem in the display is not in the LCD itself, but in the controller. The fact that when you change page you see fragments of the old page and the behaviour in general makes me think that it is a problem in the electronics that controls the display (either the controller or in the video memory). So I don't expect improvements in LCD quality.

What I hope is that they have solved the problem in the chip... otherwise, in an year or so we'll have the same problem again. This time the board was still under warranty, but I don't want to buy a new display every year...

P.S.: as to the EV5... I have bought it too, and it simply does not work (it's unusable) for the reason you say, but it's a problem with the pedal, because I tested it with all my keyboards and it does the same. Get a Yamaha FC-7, instead: you have to resolder the connector to invert two wires (don't remember which one now), but it's probably the best pedal out there, sturdy and with smooth and precise action.

Same problem arose

22 Sep 2008, 09:37
Hi guys!

Happened to my JG too - in august before a gig the screen was flickering during the startup and it took 20 seconds to get back to normal. The weather was too hot on that day so I figured it was the temperature, and paid no attention to that.

Two days ago on a rehearsal just a day after two gigs in an extreme cold weather with moisture, rain, etc. the screen went wrong again - quarters of screen were overlaying and flickering. This time it wouln't repair itself, so after a few minutes I turned it off, waited for 2mins and turned on repeatedly. After 5 times the screen went back to normal.

Then I discovered, that there are dozens of people who experience the same trouble.

I decided to sell this machine ASAP, as it is outta warranty, and I am a gigging musician who can't wait until the lcd goes byebye and then waste time dealing w/ roland inc. or dealer or whoever to replace it. I might get the Juno-Stage instead. Let's hope the chip or wherever the fault is, was taken care of on that one.

luke
Well, I had hoped that I'd been spared the display glitch but now it's going, ...going, ...gone.

The problem is I bought mine used and now I have no idea what I need to do to get this fixed (and not ripped off). I don't have a Roland service center locally, but I can put the display in myself. Any advice on where to go from here?
Thanks,
Mik

Hi Rob Juno

11 Dec 2008, 05:03
I have a Juno-G synth keyboard as well. My screen display and functions, entirely over the Juno-G, are working in an orderly state. I think that you might be an unlucky figure who has picked up a faulty keyboard in some aspects, respectively. I know it can get frustrating because i have had some problems in the past with my MC-909. I have rectified the problem for the Groove Module. Anyhow, hope you don't get anymore problems with your keyboard. Otherwise if it is me in your position, I'd claim warranty.
Keep up the good work with the keyboard playing.
Signing off, - Steve.

Re: Juno G Screen Clarity/Quality

11 Dec 2008, 08:07
Kreba,
Trust me, with the month I've had I think I'm an unlucky figure too. :-)

Unfortunately I'm not alone when it comes to a dead/malfunctioning Juno screen. This has happened to quite a few people. I hope you never have this problem-it's very frustrating.

I'd love to claim warrenty, but I'm not the original owner and I've had it for over a year. I don't mind paying to get it fixed, I'm just not sure what I need to do to get the ball rolling.

Re: Juno G Screen Clarity/Quality

11 Dec 2008, 08:23
Well as a reminder (and to anyone just reading the end of this post... My screen hasn't failed... yet... but due to its awful quality (from a playing viewing position - i.e. not looking at it perpendicularly) I have had it replaced once already. The graphics were all streaking over each other. The replacement is either a tiny bit better, or I've given up caring about it. However, when my board returned from being serviced, a servicing document was in the box... not sure whether it was meant to be left in for my eyes... but it said "compared with stock display - no difference". So I'm not of the belief that perfect screens exist... and that if you think you've got one, you're not viewing it all the time from a seated position, but looking more straight down onto the keyboard.

Re: Juno G Screen Clarity/Quality

11 Dec 2008, 16:21
Reading all of this has me a bit concerned. I have only had the G for a few months and the LCD is ok for now. Does this seem to be a problem with the earlier G's or all of them? Is there a way of finding out via serial no. when it was manufactured? Mine says Made in China but there is no sticker over it.

Cheers.

G8 dirtyLCD Screen

19 Dec 2008, 19:04
Hi,

Just got a new G8, brand new.

I’ve got a spec of white dust (approx 1mm in diameter ) under the glass of the LCD screen. It’s only visible when the G8 is turned off, but nonetheless irritatingly visible.

Has anyone had a similar problem ?

Is it worth opening the G8 top panel & trying to access the LCD screen from underneath to maybe ‘blast’ with something like a PC air cleaner ?

Any other suggesstions ?

Re: Juno G Screen Clarity/Quality

21 Dec 2008, 15:36
I'd like to know too, cus somehow it looks like I've got a tiny hair under part of my screen! On my Juno-G.

Goodness Golly Jeez!!!

26 Jan 2009, 13:47
OMG..you've really scared the sh*t outtame into buying a Juno-G...

I was astonished by the reviews, the vids and all..I was lucky I stumbled upon your comment/review in musiciansfriend mentioning the LCD problem...got real scary goosebumps when I found out the multitude of Juno-G owners that had the similar problems here...and youtube for god sakes!!!

Oh, how I long for this type of synth for 'oh so many years, only to find that Roland got a defect LCD manufacturer..and no way I'm gonna pay 100 bucks just for replacing an LCD..I'd be better off with my old gears then..oh so sad..so sad...

Please do let me know whether newer JGs does'nt have the same problem..I'd really want to know on which year it was manufactured...

Many thanks in advance..

Loving owner of Jupiter 8, JX-8P, and...a D-5 (well, it was given to me :))

Re: Juno G Screen Clarity/Quality

28 Jan 2009, 12:16
Jupiter 8-

I have had mine at least 6-8 months and my screen is still fine. Maybe 10 gigs on it..

I thought I had read in this thread that Roland said they updated the problem component and new units shouldn't have an issue.

We'll see I guess.

DOM!

Juno G screen problems

9 Feb 2009, 11:15
Hi,

I also have the same problems - screen mirror images, empty screen, fuzziness and whacky contrasts.

Image

Returned it to the store today and they'll be sending it over to Roland for repairs.

Hopefully everything goes smoothly...

Re: Juno G Screen Clarity/Quality

13 Feb 2009, 15:29
WOW, the screens fooook up that badly? Here was me complaning about the contrast and streaking. I tell you what, I'll never pay for a replacement screen, even out of warrantee... if the screen dies on me in the next 20 years!!!! I'll just show Roland all the discussion here and hold them to fit-for-purpose rules

Roland (warranty & such)

1 Mar 2009, 18:19
So far....
I've found Roland to be a pretty "upstanding" company (I've owned products since the Juno 106). The stuff has held up really well (hopefully they have licked this display problem). The only problem I've had (other than key cleaning issues) was on an Ederol product (which is maybe their computer/consumer ?? really cheap line??) A known "dead-key" problem. Called 'em up & they said.. "Yeah.. we screwed that one up" (wow.. a company actually acknowledged THEY screwed-up). "Send it in (way out of warranty) we'll drop in a new (& improved) keyboard for nothing".
I once had a problem with a Korg (sounds like an old Irish joke doesn't it).... It turned out to be a known software issue. No contact (even tho the thing was registered & under warranty) and, since no internet at that time.... I lost my butt on it.
cl

Re: Juno G Screen Clarity/Quality

10 Mar 2009, 14:59
Edirol is not so cheap... and it's often high quality stuff: try the R-09 recorder and you'll understand! :-) That said, every company can make mistakes, but it seems that you had a pretty good support.
The problem with the Juno-G screen is that Roland never admitted that the component was faulty, they never said which keyboards are or may be affected by the problem, and most important they never said if the component has been redesigned and the problems have been solved, so even people that have had their Juno-G fixed (either by paying with their own money or with the warranty) do not know for sure if that component will fail again and when.

← Back to JUNO-G