Fantom-S and Fantom-X

Fantom X6 pads not responding, can someone please help?

Fantom X6 pads not responding, can someone please help?

25 Dec 2008, 18:13
Hello everyone,

I'm new to the board, and before I ask for any help, tips, and advice, I just want to wish you all a safe and happy holiday season.

Now for the bad news. I recently purchased a used fantom x6, but pads 1, 5, 9 and 13 are not responding. At the time of purchase I was not able to test the board out extensively, but when I got it home I tested all the I/O's (audio and midi), keys (all octaves), pitch bend, knobs and buttons. Everything worked flawlessly except for the pads I mentioned. So I cracked open the manual, learned how to do pad exchange, pad velocity settings, etc, and still it's a no go. However, some times if I press pads 5, 9 and 13 ***REALLY*** hard (I'm talking two fingers or both my thumbs), something will sound back, or it will play a sound from another pad.

I've informed the guy who I purchased it from about the problem, and I believe he might not have known the pads were malfunctioning, and he and I are trying to work something out. However, if I can fix the board myself, or if replacement pads aren't that expensive, I'll go ahead and keep the board as I really do like it.

So if I open it up, what exactly do I need to look for in regards to the pads and them not working properly? Do I look for anything that is broken, bent, snapped, or sliding into another pad?

If anyone has any experience with the pads, know's about repairs, or has any advice on what to do please don't hestitate to share it.

Thanks, and once again have a happy holiday season!


EDIT: I unscrewed the bottom portion of the board and took a peek inside. I couldn't take all of the screws out, so I couldn't do anything with the pads. When I screwed the bottom cover on, and turned it back on, the patch/rhtym button actually triggers pad 1 (a kick) and the layer/split button actually triggers a pad.

Re: Fantom X6 pads not responding, can someone please help?

26 Dec 2008, 05:10
try a factory reset first and see if that does anything.

Re: Fantom X6 pads not responding, can someone please help?

26 Dec 2008, 14:06
I should have mentioned it in the original post, but I've tried factory reset at least five times now and no cigar.

Re: Fantom X6 pads not responding, can someone please help?

26 Dec 2008, 20:48
ok then sounds like you need a roland service centre for parts.
if you know someone who works on keyboards then they will be able to do it fairly easy.

Re: Fantom X6 pads not responding, can someone please help?

26 Dec 2008, 23:16
Do you know how easy the repairs are? I'm asking because if it's that easy, I may end up just doing it myself. If I can get something to take the screws out of the side of the unit I'm sure I'll be able to get to the pads (you can't get to them by just unscrewing the bottom.) Also, do you have an idea of how much new parts are?

I talked to a repair shop today and they said $150 and hour plus parts. They said it would take an hour to an hour and a half to fix it, but I don't think it would or should take that long.

Re: Fantom X6 pads not responding, can someone please help?

27 Dec 2008, 14:17
no idea about parts or repairs but I imagine if you get access to them and you can get parts it shouldn't be too hard to fix.

Re: Fantom X6 pads not responding, can someone please help?

29 Dec 2008, 13:18
Thanks da-man.

Today I'll try to open the board again, and I'll try to get the screws in the side off. Does anyone know what signs I should be looking for when I open the board again? How will I know what's broken, missing, worn or out of place?

← Back to Fantom-S and Fantom-X