Fantom-G

G8 dirtyLCD Screen

G8 dirtyLCD Screen

19 Dec 2008, 19:01
Hi,

Just got a new G8, brand new.

I’ve got a spec of white dust (approx 1mm in diameter ) under the glass of the LCD screen. It’s only visible when the G8 is turned off, but nonetheless irritatingly visible.

Has anyone had a similar problem ?

Is it worth opening the G8 top panel & trying to access the LCD screen from underneath to maybe ‘blast’ with something like a PC air cleaner ?

Any other suggesstions ?

Re: G8 dirtyLCD Screen

20 Dec 2008, 16:13
It's funny that you mention that Bob. I have a Fantom G7 and I have a tiny speck of dust or lint underneath my LCD glass too. At first I thought it was an actual scratch on top of the LCD screen but after rubbing the area gently with my fingertip over the spot and with the light shining on it just right I could tell that it was underneath the glass and not on top of it. Mine is located near the top on the left side and I don't really notice it much once the Fantom G is booted up, since the LCD background image obscures it for the most part.

The lint or dust wasn't there when I first got my G7 because I did a thorough inspection over the entire keyboard to make sure there were no marks, scratches, or dents, etc. on the keyboard itself. So somehow it got there not too long ago; possibly when I turned it over to install the RAM perhaps?? :(

I'm also not too sure what to do about it to try and get rid of it but I'm open to suggestions, either from our members or Roland U.S. too if need be. I hate to send it in to an authorized service center because I could possibly be without my axe for several weeks and it's only a minor problem really. If and when I sell it though I would sure like the LCD screen to be free of any specks or marks that might hinder it from selling. I'd have to explain to the potential buyer that Roland's factory warehouse where they assemble the Fantom G's in Japan is probably not the cleanest of places nor up to city code perhaps; and hence the reason dust or lint gets trapped underneath the Fantom G's LCD screen. :(

Re: G8 dirtyLCD Screen

20 Dec 2008, 17:10
If someone is going to open their Fantom G, please do document it (photos, video) so the rest of us knows what kind of a job it is and what all is lurking inside (what CPU?)
Jesse J / The Fantom G Facebook group - Please join!

Re: G8 dirtyLCD Screen

20 Dec 2008, 19:46
Telephoned Roland tech guy here in the UK yesterday.

He said I could open the G8 (not sure for the G7) in trying to get to the under housing of the screen. This is pretty straight forward.

To do this you have to remove only the screws underneath the G8 for removal of the entire top face panel .
In so doing you have to carefully remove from the slot the two ribbon connectors on which one is for After-touch. Only then does the top panel comes away easily. The underneath housing for the LCD screen is bit more tricky & complex to get into. The danger is blowing with an air cleaner would blow more dust into the LCD Screen.

Not Recommende course of action.

Re: G8 dirtyLCD Screen

21 Dec 2008, 10:30
Thanks Bob. I might just give it a try. I've taken other keyboards completely apart before so this should be a piece of cake regarding the Fantom G. I might wait though until my warranty expires the latter part of May. If something else major goes wrong in the meantime I could send it in to a service center and have them fix the problem(s) along with getting rid of that pesky dust particle too. ;)

It's interesting that Roland U.K. said to DIY. I would think it would void the warranty if we tinkered with it ourselves, but apparently not I guess. If that's really the case then I might go ahead and do it when I get the chance, instead of waiting until the warranty expires. Although, Roland U.S. might have a different policy regarding tinkering with the FG. They might not honor the warranty, unlike Roland U.K. which apparently does.

Re: G8 dirtyLCD Screen

21 Dec 2008, 12:31
I also suffer with a bit of dust under the screen's surface, but it is pretty inconspicuous once the G is on (in fact, I doubt you'd notice it unless it was pointed out). I think this happened, like has been suggested, when I installed the extra RAM.

Interesting note about the ease of access to the ribbon controller. Currently I don't use aftertouch on my G8 unless I want to break my knuckles so I control it externally. Perhaps it could be modified/replaced in some way to be more forgiving?

← Back to Fantom-G