V-Synth

Effects question

Effects question

19 Nov 2008, 13:30
I have a V-Synth 2.0 and am having trouble applying effects with the d-beam, TT pad or control knobs.

I know how to assign effects to each of those conrollers but the effect is applied to the patch regardless of what the controllers are doing. For example, I want to add a flanger to a patch and have the amount of the effect altered with the D-beam controller. What I am experiencing is the flanger on 100% of the time with no difference no matter what I do with the D-beam. Sure this can be done. Can anyone help?

Thanks

Joe

Re: Effects question

19 Nov 2008, 13:34
Set the MFX to flanger, and initial balance to D100:W0. Now set the D-Beam to MFX-BALANCE (or something like that) and set the depth to +63. It should work now.

effects question

20 Nov 2008, 12:52
Artemiy,

Thanks for your response, however I still could not get it to work.

If at all possible, can I get a step by step instruction?

I went in and tried to do what you suggested but to no avail. The flanger does not have the balance option (tremolo and pan do). Also, when choosing the routing there are only three MFX options... not effects but routing options. Anyway,
if I could get a step by step that would help a great deal.

I have read the manual, purchased your tweakbook and also another V-Synth book and still cannot get this work.

Thanks again!

joe

Re: Effects question

20 Nov 2008, 14:06
The thing is, if there is no balance control assigned in Matrix Control, you have to work with a flanger in the chorus effect. In this case, you set the chorus send to 0. Then, for one Matrix Control slot you send the D-Beam to MFX send, depth to -63 and now the second slot you send the D-Beam to chorus send, depth to +63. As you may understand, when the D-Beam works it will bring out the main signal and bring in the flanged one.

← Back to V-Synth