Fantom-S and Fantom-X

Pads

If I read some of these posts correctly.What is up with the pads on the S, how were the pads on the X improved ?

Thanks,
Personally, I like the pad response on the s-88. And I haven't even adjusted it from factory settings.

pianodick
"Get a man drinkin' or get a man thinkin' he'll wind up looking for angles. Get a man smokin' or get a man chokin' he'll wind up looking for angels!"©2006 All rights reserved
logan9, some people just feel new to the pads and can't get confortable with them at first. But you cant tune their sensitivity and they will be a great tool for putting drums and triggering patterns. Personally I think they are great and I use them all the way.
logan

I'll answer your questions as nobody here seems to be answering them.

On the S series, the pads are hard. People have found difficult to get the 'feel' for them. When I first tried them I was surprised - I expected them to be more like the pads on an MPC (i.e. soft and rubberish). Also, users find the default factory setting to be unresponsive. These settings can be changed and users have reported an improvment in this area.

The supposed improvement on the X series, according to the specs, is that they are now supposed to be softer. As I said, that's what the specs say - none of us here have tried one of these units out to verify this.

gtds
gtds
dunno bout pads on FX too, then what about FS...

maybe it's just a question of time and experience, but for me they still don't seem to be responsive enough for real grooving, even with EASY response setting. i mean complex grooves and percussions though, and for live feel in a generic rythm part they are quite useful.


http://www.realmusic.ru/Zeta
Peace,
They "S" pads are definately the hardest pads I've ever felt....
Nothing like the DR. Rythem drum machines, ect, that most of us are used to.. I used to own one.

I'm quite surprised by these. However I managed to swap "pad" to "keyboard" (by accident) and you always have that option, drums on the keys.

Adjusting them to "light" helps...but so far to me this seems to be a trade off for the "range of sensitivity" I could be wrong, have not spent alot time with them.
Chris USA
http://artists.iuma.com/IUMA/Bands/CHRISTOPHER_YAMSEK/
I was wondering if it would be possible to replace just the pads of Fantom-S with the pads from Fantom-X. They appear to be exactly same size. If you could order them, and have some one replace it for you.
I'm sure they could be swapped ...but, I doubt you'd be able to get hold of a set of pads alone from Roland and it may cost a bit to do too.

Then again, as I was writing the above I just thought...

You could go into a shop, explain the situation, the shop assistant could order the spare part for you (pretending he's going to fix an FX) and fit the new pads for you in their repair department.

The things to consider are:

1.) Is the technology compatible?
2.) Can you or a shop order the item from Roland?
3.) Manage to get the shop repair department to do it for you.
4.) Will this whole exercise nullify the Warranty?
5.) How much will it cost?

It may turn out to be cheaper to buy a separate pads unit like Akai's. Alternatively, if you have a DR unit or the like, you could plug that into the FS via midi.

gtds
gtds
Thanks much for all the feedback. Thing is I do not own a Fantom at this time. I am gathering as much info as I can before I make a purchase. Yes, trying to decide whether to purchase an S or X. I was up at the music store today hanging out with a Fantom/S for two hours; it had three or four expansion boards in it. It was a blast to say the least. It's true the pads are a little hard. I own a Roland HPD 15 and there is no comparison for the (feel). I do not believe I would need the added polyphony for what I do, as I hardly ever layer more than 2 or 3 instruments at a time. Being a novice at best and new to the synth world I have not yet convinced myself that I would need an X. My understanding of polyphony is: Basically you can sequence more instruments at once??
You can create your own drum loops, correct? The little time I had to spend with the Beast today I did not fiqure out how to do this.The HPD 15 you can set up as many measures as you like (LOOP) say 8 and then at the end of the eighth when it starts at 1 you add another piece, kick,cymbal whatever. Do the S pads function similar to this?

I really do not like exposing my ignorance, ( If you have'nt noticed) but I've got to start somewhere.Thanks Again for the feedback, Logan
Hey, no worries. We're all here to learn and share.

I'm a synth novice too - in that I don't actually own one yet.

gtds
gtds
the exchange of pad's buttons themselves would probably help with touch feel, but doubtfully it could change play feel, i mean response and senstivity. that should be up to the sensors under the pads. i wonder what kind they could be, piezoelectric or something...

2logan:
"My understanding of polyphony is: Basically you can sequence more instruments at once??"
yes, and more complicated layered patches, and more notes... many other threads on the forum clarify this enough.





http://www.realmusic.ru/Zeta
Peace,
"My understanding of polyphony is: Basically you can sequence more instruments at once??"

Well yes and no.

Polyphony is the maximum number of notes that can be played at once.

Not the max number of instruments. You can play 1 or as many instruments as you like, but it's the number of notes played by all those instruments at once which you need to consider.

gtds
gtds
Actually, to get nitpicky, the maximum number of intsruments is different with different synths, and does not always relate to polyphony. (The ratios are usually similar, but not exact). The term for this is multitimbral.

I think the FS is 16 part multitimbral?.?

← Back to Fantom-S and Fantom-X