Fantom-S and Fantom-X

program change

program change

15 Jan 2008, 13:49
I am trying to change the patch assigned to a track halfway through my song. As I understand it, this is accomplished by a program change command. I set up a controller event - bank select and a program change command in sequence (both set to the correct values), but when I play back my song the patch remains the same. Anyone know what I'm missing?

Thanks in advance!

Re: program change

15 Jan 2008, 21:58
Never done it in the Sequencer, I believe you need to insert Bank MSB, Bank LSB and Program Change.

Re: program change

16 Jan 2008, 02:51
Hi MTS,

Your Midi Sequence has embedded earlier Program change and Bank values.

Erase it and then insert your new Program change messages.

Scroll your event list view and delete earlier embedded bank and program change messages.

Hope this helps

Re: program change

16 Jan 2008, 08:50
And in case it's relevant...


The only time I've found program change commands don't work is in an imported General Midi file.


Such files imported into the Fantom may need to have Sysex and other commands deleted for program change commands to be effective.


(a la V-CeeOh midi tutorial).

Re: program change

16 Jan 2008, 11:44
Ok CC 0 is Bank Select MSB CC 32 Bank Select LSB

Must go in order. In order not to be confused.


CC 0
CC 32
Program Change

Okay figured this one out...

16 Jan 2008, 12:55
First of all, thanks for everyone's advice - it definitely helped. I figured out the problem here, and it's kind of strange to me so I thought I'd post it just in case someone has the same problem in the future.

Turns out the MIDI RX settings in the system preferences apply to external sequencers AND the internal sequencer. I had my Fantom set to ignore control change and program change commands (to keep my external sequencers from affecting my performance patches), and this was also causing my fantom to ignore bank select / program change commands I programmed on the internal sequencer.

I was under the impression these setting only affected MIDI reception from external gear. Just a heads up!

MTS

← Back to Fantom-S and Fantom-X