Fantom-S and Fantom-X

Performance Mode Expression Pedal question

Performance Mode Expression Pedal question

16 Aug 2007, 14:00
I have 2 sounds that I have set-up in a performance mode......what I'm looking to do is to have the 1st sound play alone with the expression pedal off (all the way back) and then have the 2nd sound play alone when the pedal is on (all the way forward) and somewheres in the middle of the pedal swell both sounds will play together.

I know how to set it up so that I have the first sound play and then by swelling the pedal I can get the second sound to join the first sound, but how do I do it so that I slowly switch between the sounds as I swell the expression pedal back and forth?

Re: Performance Mode Expression Pedal question

16 Aug 2007, 14:36
You can use the Matrix Control function (CTRL 1/2/3/4 tabs in the patch editor) to map the expression pedal to both patches with reverse polarity. I.e. for patch 1 all tones will have zero TVA level and expression pedal SENS of +63, for patch 2 all tones will have normal TVA level and SENS of -63. This way when you press the pedal tone 1 will fade in and tone 2 will fade out, and vice versa.

Re: Performance Mode Expression Pedal question

17 Aug 2007, 07:48
Artemio,

Do you know if there is a way to use the Expression Pedal connected to the Fantom to perform the same type of control on two external devices via MIDI?

Sincerely,

Doug
Roland Fantom X-7, Super JX (JX-10), Juno-60, MKS-70, MKS-20 and a whole lot of fun playing classic rock.

← Back to Fantom-S and Fantom-X