Fantom-S and Fantom-X

Help - Notes sticking

Help - Notes sticking

14 Jan 2006, 10:55
Fantom XR with Cubase SX 3 via a Steinberg Midex 8 midi hub. Triton Ex master keyboard.

All notes play fine except C4 which when I play sticks constantly.

All other modules connected in this same configuration via the Midex work fine. Supernova and Nord Lead.

Any suggestions anyone?

Thank you.

Notes STICKING. I SECOND THAT!

16 Jan 2006, 03:59
i've got the same situation.
i'm using DP 4.61
OS X 10.4.4
Motu Microlite Midi Interface
Ugly VST interface with SampleTank
--------

I've been wanting to call Roland Tech Support about this.
But I've called before and got a line of hooey.
I have issues with my XR that i have yet to resolve.
I'll search the boards here but let me say this:

I called about certain patches in PATCH mode not working when you
try to use them in performance mode. I was basically told that I had to
"knuckle down" and copy the sounds to a user bank
then edit the FX to get the same sounds as they occur in patch mode.
ok, you don't pay over a thousand dollars for Rolands flagship
sound mod to "knuckle down" and do some grunt work.

They hold a firm company line on the phone.
They ignore the existance of applications with which they have
no corporate assoiciation. Sorry folks, but MOTU is no newcomer
to the game. I think you can keep up on their development
if you're Roland.

Yes, this is ranting, but my point is, even using my XR in this
oversimplified state is failing. NOW i've got the stuck notes issue.
I live in L.A. We've got a major Roland distribution and service
headquarters here. I'm this close to crashing the docks down there
and demanding that one of those hokey old timers on the phone
fix my sh**. I'm normally very diplomatic and considerate.
But now this is messing with my lifes work....and i'm miffed.
hmph. sheesh. how dramatic.

Has anyone found a res to this...

2 Jul 2007, 01:18
I have a similar setup and a similar problem. I'm using Fantom XR Triton Studio and Cubase. and occasional stuck note until i turrn the XR off and back.

Just hoping someone figured it out.

Same issue but with ....

2 Jul 2007, 09:58
... a different MIDI event generator. I am using a guitar to MIDI converter, and ocassionally some notes stick. I have found that this happens only ins some patches that I created from scratch, while not in the others.

I have, however, seen different notes stick, for example the G. I talways thought that it was the guitar-MIDI converter sending out incorrect sustain/HOLD messages to the XR, and thus holding notes. Quickly switching the performance to another one, and right back solved the problem, but would trigger again, until I turned the Fantom off and on again.

;) Manish
;) Manish

Re: Help - Notes sticking

2 Jul 2007, 16:15
It seems to be a common problem. I guess I'll email Roland. We're all using a workaround when we shouldn't have to.

Re: Help - Notes sticking

2 Jul 2007, 22:14
Hi, Yes I have had this problem also with my xr with dp 4.61 and only with the Roland and no other module, but I have not had the problem with dp 4.52.
When I tried both companies tech support each one blamed the other,
have always suspected the xr and this topic makes me think I might be right.

T20.

Standard Midi port or USB Midi

3 Jul 2007, 00:12
Does it make any difference with any of your setups whether the data is sent to your Fantom XR through the standard Midi port or through USB?

I have a Fantom X6 which chokes on a lot of midi information coming into it but only if the Remote Keyboard switch is set to on. Unfortunately..... I need it on. So I thought of getting a MIDI to USB converter and to send in the data through the USB port.

Which MIDI port are you using?

Current boards: Fantom X6 and P-80

Sticky Midi Notes

3 Jul 2007, 00:54
I can see this problem is somewhat universal.
It appears as though it's happening with different sequencing programs as well.
I use DP 4.61.
For those using DP it would seem that multiple installations of the app.
may be one cause of this.

I'm finding that it is not exclusive to my Fantom XR.
It would be great if any replies listed hardware i.e. computer platform
if relevant.

I know the problem can be, to some extent, attributed to the MAC os
in some cases. Any more thoughts would be appreciated. Thanks all
and good luck.

← Back to Fantom-S and Fantom-X