Senior member

Cesarsound

Recent posts

Re: Yamaha Ac Piano + Elec Piano CP70 + Hammond B3 – FanX in Fantom-S and Fantom-X · 27 Jun 2013

You are welcome!

Re: Roland XP50 LCD Display Problems in JD, JV, XP and XV series · 27 Jun 2013

hi there i saw in an earler post that you can use polyester caps can you also use tantalum caps of the same value as no caps have leaked on my xp50 i will just change them all and tantalum caps are easy to replace smd ca...

Re: Yamaha Ac Piano + Elec Piano CP70 + Hammond B3 – FanX in Fantom-S and Fantom-X · 26 Jun 2013

Hi Andy, You can find all my sounds in this link: http://www.motifator.com/index.php/forum/viewthread/455729/ Or, specifically the library you want, is here: https://rapidshare.com/files/426901162/YamiePiano_CP70_B3_FanX...

Re: Roland XP50 LCD Display Problems in JD, JV, XP and XV series · 14 Jun 2013

My gess is that the display is bad and needs to be replaced.

Re: Roland XP50 LCD Display Problems in JD, JV, XP and XV series · 9 May 2013

Hello, I folk kindly made a video showing the simple process to repair the display, as I explained in this thread. Please watch it here: http://www.youtube.com/watch?v=DBlEcb1rZMA Cesarsound.

Re: Roland XP50 LCD Display Problems in JD, JV, XP and XV series · 1 May 2013

Hi ebowglow, You may find the service manual here: http://elektrotanya.com/ Good lock. Cesarsound.

Re: Roland XP-50 factory disk in JD, JV, XP and XV series · 8 Apr 2013

I have a XP50 since 1995 (purchased brand new) and I have the original diskette. You are lucky guys, here is the files from original diskette: http://rapidshare.com/files/2701993220/XP-50-Demo%20Orig%20Cesarsound.rar Enj...

Re: XP-50 output problem (Volume) in JD, JV, XP and XV series · 22 Jan 2013

Hi Obsolet, The problem may be on caps that are on the audio path, coming from DA converter to op-amps output. You should try to replace that caps, following the service manual schematics. Also, here are some useful info...

Re: Roland XP50 LCD Display Problems in JD, JV, XP and XV series · 10 Sep 2012

Hi Gerard, I am happy if a I could help someone. About your problem of keys / tuning, my gess is dirty contacts on keybed. I suggest you remove all the keys and clean the rubber and PCB contacts above the keybed. About t...

Re: Fantom X CR78 Rhythms help needed. in Fantom-S and Fantom-X · 14 Aug 2012

Hello. I am fanboy of old drum machines, such as CR78, TR-808, etc too. While the Fantom has some samples of CR78 (although I think the CR78 samples on Fantom are not so good) it does not have a ready to use drum kit, so...

Topics started