wintersunproject

Hi Nickster, sorry for not replying earlier, glad you got your sysex sorted, i got mine sorted thanks to the other two guys on this thread.. And i agree with what your saying, the JP08 does sound just like the real deal,...

Great work, I've finally got all this working. i appreciate your help and time CB, its very music appreciated !

Did you also try the one I amended again (with the SS in it) ? Apologies - the one I PM'd you was edited wrongly. Use this one. F0 41 10 00 00 00 1C 12 SS 03 00 02 00 00 00 S1 F7 If that doesn't work, then try: F0 41 10...

When i enter Youno's code the editor accepts it... So were now making a little progress :) Thanks for your input both of you.. so far.

Again it just can't accept a sysex message of that length it seems. i might have to give up on the A-500

Im not entirely sure, i can't find a definitive answer on that. According the manual you should be able to do the lot.. I'll give that a go and i'll be back shortly thanks for this..

The A-500 is being used to control the JP-08 via the hardware MIDI sockets, not via USB. That bit works ok. However, when you plug in the usb connector and use the host software on the mac, thats where the problems start...

I have a Roland A-800 the biggest problem is it doesn't seem to want to accept the sysex string at all. can anyone confirm if the A-500 is compatible with the sysex strings for the jp08 ? Thanks in advance

The problem i have so far is the A-Pro Editor program will not accept the sysex code at all. so i can't even get past that. even if you change the data types DT0,DT1,DT2.DT3,DT4 etc.. its absolutely doing my head in. I d...

Thanks guys, I've read that syses chart and I'm getting there "sort of" I'm still lost with the checksum and how to implement it into the code and get it to work with my A500 controller, I'm finding it tough going. the w...