tboneuk

Maybe it is only using a range of 128 (as per midi cc spec) and interpolating the rest of the values boutiques use values 0-255

I have uploaded the files to http://mountainutilities.eu/userfiles/b-control

Finished the initial BCR implementation. I wanted a layout that like the CF I have been using is sort of standard across all 3 boutiques. I have not included the switches/buttons as we have a wonderful interface with the...

Finally got around to trying the BCR2000. Pleased to say, no problem. Just going to work out the best layout and I will post a sysex dump (if allowed in this forum) for all 3 boutiques in the next few days

Yes, that's what I found to be the case. A caveat to this is that to controll 2x Jp's as well as jc and ju the jp's had to be set to midi ch 1 otherwise only the first jp responded to the control freak.

Thanks for the schematic, very useful. I am going to have a dig around at the weekend and see what I have available. I know I have plenty of opto isolators and pretty sure I have some hex inverters even if I do not have...

Certainly an IOS could as long as it can generate the Roland checksum. I have not used the app you mentioned but have used a similar app before. I will program the BCR2000 next I think as the 32 pots would suit the bouti...

@WITCHMASTER Full list now including all buttons and switches for all 3 boutiques Sorry its so late mate, life, work etc Anyway looks quite straightforward and cheers for the code you posted previously JU-06 XH XL 06 00 ...

The original did the same. Roland recreated the noisy chorus as part of the character of the instrument.

Sounds good. Hasn't the 328 only got one hardware UART? Of course even if it has you can use software UART for the midi out. I'm interested to see how it pans out. Could save a bit of developing time for both of our proj...