ebowglow

I've had something similar happen to my xp80. Have you tried installing one board at a time and turning on the xp80 after installing each board (make sure it shows up)? That seemed to work for me. Also.. you might try bl...

Hi, Im having an issue with my XP80. When I press the Perform/GM button the keys are split (lower half trigger sound and from middle c on up is silent). It doesnt do this when I press the Patch button or Patch and Perfor...

Looks good to me! Thats the same list I used!

Can anyone tell me if I am reconnecting my ribbon cables correctly? The colored wire on the black cables are considered PIN 1 right?

Thanks Cesarsound! Thanks for sharing your knowledge about the xp 50 circuitry. :o) Do you think it would be okay to replace C931 and c932 with 10 uf 16v radial caps? I have found only 10uf axial caps in 15v. Or does it...

[i]"C931 and C932: both 10uF are the power supply decoupling for the +15v / -15v lines, that supply the analog section (Op Amps). It is recommended to replace the capacitors after 5 years old because they become dry and...

Anyone have a schematic they can share or email to me for roland xp 50?

[quote="Cesarsound"]C931 and C932: both 10uF are the power supply decoupling for the +15v / -15v lines, that supply the analog section (Op Amps). It is recommended to replace the capacitors after 5 years old because they...