RRabbi

Does this apply for Fantom XR too? and, if so, how do I do it? I'd buy a Boss FSFU, but don't see any pedal inputs on the back of the Fantom XR nor does the manual mention anything about tap tempo.

I just want to confirm (after I researched this a bit) that it seems to be impossible to use any sort of tap tempo with my Fantom XR synth... I originally was trying to figure out a way to use my Edirol PCRM80 for a tap...

exactly... yeah, from reading the manual it seems to say that for certain notes (i.e. if I choose 16 beats or 8 beats for the arpeggio) some of the notes can "hold" which i'm assuming I'd need to do for some in the riff....

I want to create an arpeggio for the baseline of "What'd I Say" by Ray Charles... I'm using a Fantom XR but for the life of me can't figure out how to create and place each note (and some notes are held longer than other...

just an Edirol PCR-M80 keyboard controller... it has 8 faders, but they aren't motorized or anything.

aaahhhhh I see. So I'd have two lines, per part, one with the min value of the fader (i.e. 0) and one with the max value of the fader (i.e. 127). And somehow when I move the fader on the board it will go in between those...

I guess, what I'm confused on is the $xx and $yy values I'd have to enter... i.e. what they'd look like, for an example...

THANK YOU! Exactly what I needed... I'm very new to sysex and so I'll try my best setting this up... That said, if I wanted to set the "min" volume as 127 and "max" at 0 (to emulate drawbars), would let's say part 1 look...

While in a performance, I want to be able to adjust each individual part level using the faders on my Edirol PCR-M80 MIDI controller. I was able to to use the actual FANTOM XR controls to do this, but it's slow and not v...

Ok, figured something out. My midi keyboard controller apparently can only transmit on one MIDI channel at once! It's a limitation of the keyboard, and I found this out be reading a review of the PCR-M80 online, where a...