Regular

fleizenkruz

Recent posts

Re: Roland ef-303 in Grooveboxes · 25 Dec 2008

i've tried one, didn't really like it. probably because i've been spoiled by korg's kp3 :D this is a "musical" effect unit, i think it's more of a unit that you will use to spice up your composition rather than for the "...

Re: Where can I lay my hands on an MC-09 in Grooveboxes · 18 Sep 2008

if you are in australia you might be lucky http://bavasmusic.com.au/store/roland-mc09-phrase-p-1122.html

saving rhythm patch in Grooveboxes · 17 Sep 2008

i wanted to build my own drum kit, so i load everything up according to the manual, saved it and played around with it, ended up making a song out of it. When I turned it up the next morning, all my drum tracks were gone...

Re: MC-909 Fuzzy highs when sampling in Grooveboxes · 13 Aug 2008

btw, my ram is similar to this one : http://cgi.ebay.com.au/SDRAM-256-MB-PC133-DIMM-SINGLE-SIDED-168pin-brand-new_W0QQitemZ110279200181QQihZ001QQcategoryZ80165QQssPageNameZWDVWQQrdZ1QQcmdZViewItem i bought it from ebay,...

Re: MC-909 Fuzzy highs when sampling in Grooveboxes · 11 Aug 2008

i had another post here regarding to the memory, apparently if the ram module is not installed properly, your 909 will go crazy (mine's went crazy by reversing every samples that I've got inside). I have to push it firml...

Re: mc-909 to mc-303 (midi connection) in Grooveboxes · 7 Aug 2008

nevermind, found the answer, just have to set the midi output in the 909 to INT instead of BOTH (which means that it will send the midi notes to drive both the internal synth/sampler and any hardware connected to it midi...

Re: MC-909 Fuzzy highs when sampling in Grooveboxes · 7 Aug 2008

I have a Korg KP-3 Sampler i use to record samples from into the MC-909, but i used a computer as input and i got the same problem. i'm not really sure what that sentence means, can you describe in details on how did you...

mc-909 to mc-303 (midi connection) in Grooveboxes · 4 Aug 2008

I tried to connect my 909 thru midi to my 303. i already set the sync1 in the 303 to SLAVE, but when I hit the play button on the 909, the part selected in my 909 was triggering the part selected in my 303. I only want t...

Re: MC-909 problems - all samples got reversed? in Grooveboxes · 26 Jul 2008

case closed out of curiosity, i opened the back panel, i saw the RAM module was not fully inserted, so i pushed it deeper a bit. when i turn it on, all the problems gone :D

Re: MC-909 problems - all samples got reversed? in Grooveboxes · 25 Jul 2008

anyone still have the old operating system? just curious...

Topics started