FA-06 Midi/Audio wiring help!
6 Nov 2024, 04:40I`m not sure where to start here, so i`ll explain what my aim is first.
I want to be able to take Just my FA-06 with me if I want to do gigs, but I`ll be composing in a studio with and MC-707 and 2 external synths as well, so i`ll want to be able to take those sounds with me when i`m using just my FA outside the studio.
from what I can tell I`ll be able to do this by sampling them and using them as a backing track that i can trigger in the FAs sequencer, so far so good!
the issue is that i`ll be using the FA to sequence the external synths, and if i`v already recorded the 707`s work into the FA as the first layer of the backing track, I can`t then layer/overdub onto that the sounds from the external synths or even the FAs own sounds because i`ll be recording blind since it can be playing a sample and recording a sample at the same time! (I so hope I`m wrong about this!).
I have an external recorder and the only way I can see to do it would be to do all the over dubbing on that (but it won`t be synced in any way except by ear) and then import that into the FA as a sample to be triggered by the sequencer. this would be a real pita to do!
is there no way to overdub with the sample engine on the FA? it would be a mamoth task to be playing and getting the timing right trying to do all that in one take!
so far my wiring map would be: audio; both synths and 707 go into a small mixer and the stereo out of that goes into the FA stereo in, the output of the FA goes into the 8 track recorder out to speakers/headphones.
Midi: the FAs midi out goes into a splitter then out to the synths and 707, each with their own chan, the 707 is a special case since the midi will only be for note entry into it`s 8 chans and clock sync (no need for 8 different chans), this will leave me ch16 for pads and 12 other chans free for the FA itself to use since ch10 drums will be handled by the 707.
IF i could layer/overdub in the sample pads this would have been perfect, is there a way I wire this up to make that possible? so I can bounce down after adding each layer?
I want to be able to take Just my FA-06 with me if I want to do gigs, but I`ll be composing in a studio with and MC-707 and 2 external synths as well, so i`ll want to be able to take those sounds with me when i`m using just my FA outside the studio.
from what I can tell I`ll be able to do this by sampling them and using them as a backing track that i can trigger in the FAs sequencer, so far so good!
the issue is that i`ll be using the FA to sequence the external synths, and if i`v already recorded the 707`s work into the FA as the first layer of the backing track, I can`t then layer/overdub onto that the sounds from the external synths or even the FAs own sounds because i`ll be recording blind since it can be playing a sample and recording a sample at the same time! (I so hope I`m wrong about this!).
I have an external recorder and the only way I can see to do it would be to do all the over dubbing on that (but it won`t be synced in any way except by ear) and then import that into the FA as a sample to be triggered by the sequencer. this would be a real pita to do!
is there no way to overdub with the sample engine on the FA? it would be a mamoth task to be playing and getting the timing right trying to do all that in one take!
so far my wiring map would be: audio; both synths and 707 go into a small mixer and the stereo out of that goes into the FA stereo in, the output of the FA goes into the 8 track recorder out to speakers/headphones.
Midi: the FAs midi out goes into a splitter then out to the synths and 707, each with their own chan, the 707 is a special case since the midi will only be for note entry into it`s 8 chans and clock sync (no need for 8 different chans), this will leave me ch16 for pads and 12 other chans free for the FA itself to use since ch10 drums will be handled by the 707.
IF i could layer/overdub in the sample pads this would have been perfect, is there a way I wire this up to make that possible? so I can bounce down after adding each layer?