FA-06 / FA-07 / FA-08

Volume balance between keyboard, samples, and songs.

Volume balance between keyboard, samples, and songs.

26 Feb 2015, 11:47
Hi all,

I've looked through the manuals, and through the forum, but I can't find an answer yet: Is there a control somewhere in the FA-06/08 that controls the volume of the keyboard relative to the samples or songs? It might be fun to jam with some of the samples, but I can barely hear myself, they're so loud. There's the Input Level control, but that only boosts the keyboard sound by about 27%, still not loud enough to hear. The only workaround that occurs to me is to take all the samples on the card and edit them in Goldwave or the equivalent to turn down the volume.

Thanks

Re: Volume balance between keyboard, samples, and songs.

26 Feb 2015, 12:19
Controlling the balance of volume between the different sources of sounds in a keyboard workstation is always a considerable challenge, especially when there are discrepancies out of the box like with the FA!

There are lots of ways to adjust how loud or soft everything is, and it depends on what is causing the issue. It isn't always volume. Sometimes frequencies are clashing, so you have to reduce the frequency content of one of the sounds via an EQ (either the three-band part EQ usable by each part, or an additional EQ module in the MFX slot) in order to make room for the frequencies of the other sound.

However, in your case, there is a simple solution. Hit the Pad Utility button, and you'll be able to go into sample edit mode for any samples on the pads. Once in sample editor mode, you can simply adjust the level of the samples by using the arrow keys to navigate to the volume control and turning it down with the jog wheel.

-Tom

Re: Volume balance between keyboard, samples, and songs.

27 Feb 2015, 19:44
Thanks, Tom.

What a complicated procedure for such a simple purpose!

Ken

← Back to FA-06 / FA-07 / FA-08