Fantom-S and Fantom-X

Creating and distributing new patches with multisamples

Creating and distributing new patches with multisamples

8 Nov 2013, 03:38
I am in the process of converting the free Blanchet harpsichord samples frmo
http://sonimusicae.free.fr/blanchet1-en.html
for use my Fantom-XR .

I started with an old version of Translator Free which converted half the samples from the first stop - only for the note-on, but no sound for the note-off .

I started from a blank memory card. After much trial & error and manual reading, I figured out how to create the new multisamples from the note-off release WAV files and how to create the proper patch with the tone release - it involves changes to TVA/TVF and setting tone 2 delay mode to "off-normal".

My main question is, when I am finally done with the conversion, how can I properly package the new patches & samples for distribution and use by other Fantom-X users ?

One way is to save the whole content of my memory card into one ZIP file. But I think this is very user-unfriendly. One might want to use only one of the 3 harpsichord stops for example.

And I have other samples I want to manage in my library too.

As far I understand, Fantom librarian software manages patches, but not samples.
It doesn't really do much good to save the patch if it's going to refer to some sample names that may not be there on another Fantom.

How do people import/export sets of samples to go along with patches ?
When I am creating the samples, I first put the individual WAV files in TMP\AUDIO_IMPORT .
But after the initial long import (and save, sigh, had to figure that out too) , the files get renamed to smplXXXX.wav and moved to the Roland\smpl subdirectory, where XXX is a 4 digit number that depends entirely on the currently available spots.

Are the Roland Fantom-X patch/multisamples referring to the individual sample files by index ? If so, one would have to fix up those indexes ... Or are they referring to some unique property of the file (say, an internal hash) ?

Re: Creating and distributing new patches with multisamples

21 Nov 2013, 22:15
No one, really ?

Re: Creating and distributing new patches with multisamples

22 Nov 2013, 05:31
Hi madbrain,

Unfortunately, there is no easy way to transfer multisamples and samples between cards.

The best way I have found is to start different sample projects at specific sample numbers (by using Henrik Grek's Fantom sample software). For example, start EP1 at sample 1100, EP2 at 1500, Harpsi1 at 2000, Harpsi2 at 2500 etc. That way, at least, you have a cat in hell's chance of being able to simply swap the files from one catrd to another and the same with the multisamples and Patches.

Sorry it's not a better answer.

The easiest thing would be to create a "plain" card with just that multisample on in and share that as a ZIP file.

Regards
Andy
Andy

Re: Creating and distributing new patches with multisamples

22 Nov 2013, 23:00
Andy,
Andy Keys wrote:
Unfortunately, there is no easy way to transfer multisamples and samples between cards.

The best way I have found is to start different sample projects at specific sample numbers (by using Henrik Grek's Fantom sample software). For example, start EP1 at sample 1100, EP2 at 1500, Harpsi1 at 2000, Harpsi2 at 2500 etc. That way, at least, you have a cat in hell's chance of being able to simply swap the files from one catrd to another and the same with the multisamples and Patches.

Sorry it's not a better answer.

The easiest thing would be to create a "plain" card with just that multisample on in and share that as a ZIP file.
That's what I was afraid of.

Swapping cards is not really a viable option, unfortunately. I would have several harpsichord patches for the different stops, 8', 4', lute stop, etc. And I want to put them together on one card so I can switch between different stops on my double-manual controller. It is a Roland VK-88 which makes it very easy with the "registration" buttons.
But that can only work if the sampler has all the samples/multisamples in it.

Perhaps the Fantom XR is just too old and I should give up on it and use sampler software from the computer instead ...

Re: Creating and distributing new patches with multisamples

27 Nov 2013, 04:01
the only software I know it works, is Yase.
You can save the patch as Yase program, and then import it again on another card.
It will see what number of multisample are occupied, and let you use a black one, the same thing with the sample list.

All you have to do is:
1. export the patch from a card as yase program.
2. insert the second card, let the yase read it (or you can use a copy of that card on a hard drive)
3. import the program
4. press save
5. and then as the pictures shows...
[attachment: yase.PNG]
Attachments
yase.PNG (487 KB, 947 downloads) · file not available
Do not ever be ashamed of what you are, what you feel, and what you think. The truth hurts, but it is necessary.

← Back to Fantom-S and Fantom-X