Fantom-S and Fantom-X

Effects issue

Effects issue

7 Mar 2009, 00:14
I notice that when I switch patches, the basic Reverb effect changes on the live vocals. Is there a way to bypass this? I attempted to mess around with the MFX but cannot seem to find the setup for the mic in. After installing the SRX-02 today, the same is true with the pianos. When using the Ultimate Grand, I can set the mic effects (using shift mix in) and it remains, but the moment I switch piano patches, the reverb on the mic changes to reflect the patch it seems.
Roland Fantom x8 w/ SRX Complete Piano
Roland FP2 Stage Piano
Korg Triton Le w/ Sampler Expansion
Korg X5D Rack
Kurzweil SP76 Stage Piano
Yamaha YPG-535
Casio Privia 320
Hammond 1970
Acoustic Spinet Mason Rische 1955

Re: Effects issue

7 Mar 2009, 02:12
In your routing screen, you should see the the "effect source" parameters, namely MFX1 SRC, MFX2 SRC, MFX3 SRC, CHO SRC and REV SRC. These tell if the effect parameters are set manually by you, or they are loaded from a certain part of the performance. Say, if REV SRC is set to part 1, it will always change when you change the patch on part 1. Set REV SRC to PRF (performance) and adjust it as you like. Now it will stay as it is when you change patches.

Re: Effects issue

7 Mar 2009, 03:38
Thank you, I tried that but I dont think that is what I was looking for. What I am trying to do is set a Reverb on my microphone that will NEVER change when I select other patches/performances. I tried useing the routing screen as you suggested but I still find that the Reverb on the mic changes accordingly with the various patches I select. The manual is showing me pretty much the same as what you suggested. Maybe I am looking to do something that cant be done.

Example. When using live microphone with the Ultimate Grand patch, I have the reverb on the microphone at 45 (in reverb level).

When I select another piano patch, there is still Reverb on the microphone, and it is still set at lvl 45, however it changes reverb type (no clue which one) and I lose the preffered setting, even when switching the parameters in the routing window to Part 1 or Prf accordingly.

Soooooo, I am thinking that the reverb being used on the microphone (which I like) is matching the reverb used on the Ultimate Grand or something of the sort, otherwise it wouldnt be changing to different styles of reverbs when the patches change.


I like the preset effects used on each individual patch so I dont want to change those. Just want to anchor the one type of reverb on my mic and keep it that way.

Does all this make sense? I am not making sense to me now lol.

SemiTone
Roland Fantom x8 w/ SRX Complete Piano
Roland FP2 Stage Piano
Korg Triton Le w/ Sampler Expansion
Korg X5D Rack
Kurzweil SP76 Stage Piano
Yamaha YPG-535
Casio Privia 320
Hammond 1970
Acoustic Spinet Mason Rische 1955

Re: Effects issue

7 Mar 2009, 03:46
The reverb send level set in the MIX IN setup page (SHIFT + MIX IN), not in the routing screen of your performance. So it stays the same when you change patches or the whole performance.

← Back to Fantom-S and Fantom-X