Fantom-G

Fan-G as USB audio interface?

Fan-G as USB audio interface?

18 Jun 2008, 01:58
I am considering the Lop top option for live performance to play backing tracks and was checking out available audio interfaces. Then I thought- can it be possible to treat FG as audio interface? Does it able to transmit Audio via USB? If I did not have sound card in my PC, when I open Sonar (or other DAW), and FG connected with USB- will I see only MIDI In/Outs, or will there also be Audio In/Outs on my in/outs list? I know I can do it with Motif via Fire Wire. But USB- I know- I can open/transfere audio file, but can I actually record and playback audio?
www.astralv.com www.myspace.com/astralvl

Re: Fan-G as USB audio interface?

18 Jun 2008, 02:26
The fantom-G has midi and audio over USB so that must be possible. I have not tried it yet tho.

Re: Fan-G as USB audio interface?

18 Jun 2008, 20:08
Yes, you should be able to see an ASIO driver for it. At least, that is what everyone was saying. When I look at the specs- it deoes mention audio/midi over USB
USB Connectors: USB Computer Connector (supports file transfer or mass storage class, and Audio/MIDI)

[edit]
Yes, the G is a full 2 in 2 out ASIO interface.
Read the manuals- there is a Driver installation guide page that tells you everything.
Sonic Cell User Group
http://launch.groups.yahoo.com/group/SonicCell/
I ran some tests and this is what I got: I did not find anything in menual about Audio via USB or even MIDI via USB- if you see it, plz, post the page.

The "Find new hardware" wizard ran again when I connected Fanton via USB- thats 2nd time I had to install it. Some drivers do that, so I hope its not going to do it every time i n=connect it.

I was able to see 1 In and 1 out for Audio and MIDI In/Out on a list in Sonar.

I am still in WDM/KS driver, not OASIO.

I was able to get Audio to be recorded. The problem is: there is no "monitoring" via USB. Other words- the level is fine but you can not hear what you playing. If you using prerecorded in MIDI track, then it may work, but if you need to hear what you playing, you may have to use Mixer board and run connection from Main audio output. Which shows false level and usually louder than signal you recording.

Lots of digital clicking. I was scaptical about all this USB Audio recording and I am getting continious clicking. Also there is constant digital background noize- simmilar to MIDI transmission sound- you would know what I mean if you heard "midi at work".

I was not able to make MIDI work. No transmit or receive- no In or Out.

Note that this is yest in WDM/KS. I can not use ASIO because in Sonar it is only 1 audio devoce at a time, and I have 3 sound cards aside from original one on motherboard. With Window driver I can get them all working except Audio with Yamaha Motif mLAN, but I am getting MIDI with it. With USB- Audio but no MIDI.
www.astralv.com www.myspace.com/astralvl
Ok- Using MME 32 bit I got some what better results. No clicking. However: I did get MIDI work in LIVE mode, via USB, I recorded notes and it played back. When I switch to SINGLE mode, no notes get recorded. Any ideas why? The playback working. Notes that I recorded with LIVE mode are playing and I can hear piano in Single mode, but notes I play on keyboard don't get recorded in MIDI. What's wrong?
www.astralv.com www.myspace.com/astralvl

Re: Fan-G as USB audio interface?

19 Jun 2008, 05:28
MIDI sending in Single mode is disabled. Don't ask me why. It just is ;-). So, for recording you must be on either Live or Studio modes.

Re: Fan-G as USB audio interface?

20 Jun 2008, 06:17
???
You just said
When I switch to SINGLE mode, no notes get recorded
. Now you say it works fine??? Don't get you.
The Fantom G does not send MIDI in Single Mode unless this has changed with ver.1.10. I don't know if that's the case.

the fantom G as audio/midi interface

20 Jun 2008, 08:12
Hi,

don't use standard midi cables if you want to use the G as an audio/midi interface! The USB cable handles both the audio in/out and the midi in/out.

There should be a CD that came with your G and a quick-install guide. On this CD are the drivers for the USB interface and the library editor VST/AU.

You should first install the drivers for the USB and THEN connect the fantom G with the USB cable with your computer.
R4uz, thank you for reply, I got ya.

V-CeeOh, with standard 5 pin MIDI connection- the old fassion one that we used before the computers :) I can send and receive midi data (notes) in Single mode. With USB it looks dead. No activity in Sonar. That does not make sense to me. Yes, I can use old MIDI but I would not want to run 2 extra cables if I don't have to. Was going to try it out again last night and spent entire practice fixing something else, so- no more update. Some how it began to transmit to Motif's mLAN- I must be set wrong output channel- It would not stop playing- I thought- Fantom freeze, but it was Motif playing in performance mode with arps on- took me a good minute to figure out. But I can swear- I set both In and Out to Fantom G for Midi. So then I dispowered it and than my mLAN crashed on Motif and it was no fun evening. But far as I know- I got no MIDI transmission with USB MIDI in Single mode, but got perfect one with 5 pin old MIDI connection.
www.astralv.com www.myspace.com/astralvl

Re: Fan-G as USB audio interface?

24 Jun 2008, 02:06
Very strange - I am not able to transmit in "Single" mode using midi cables - only in "live" and "Studio" mode.

Re: Fan-G as USB audio interface?

25 Jun 2008, 17:44
What do you mean - Audio Plug is not the same as audio interface. If you mean Audio Interface, you can buy a much better quality, but for live use it might not be worth it.

Re: Fan-G as USB audio interface?

29 Jun 2008, 23:11
Been using the usb 2 as an audio interface. Conclusion:

Needs better drivers. Can't handle over 4 channels with out drop outs and pops and clicks..

I fully expect Roland to have an update to bring us M-Audio type of USB driver stability and performance..
JJD Media Production

← Back to Fantom-G