Grooveboxes

PLEASE HELP sp606 w/ midi controller

PLEASE HELP sp606 w/ midi controller

17 May 2008, 16:04
I got the sp606 connected to an external midi keyboard and I can play the stock sounds from the sp606 with the keys on the keyboard, but when I change to a new pad bank with my own samples, the keyboard still triggers the stock samples even though that pad bank isn't even selected anymore.

The pads on the 606 will play the correct selected bank, but the keys on the keyboard seem to only want to play the stock sounds from banks 1-4.

Has anyone heard of it doing this?

Is there something wrong with my "midi utility" setup in the 606? I have it connected right (out to in, in to out).


Please help
You might have to save your sample as a patch before you can trigger on a controller. If that doesn't work, try connecting midi cable from 606, in to outport socket of controller. See if that works. Its only a guess tip. I have never used the 606 sampler.

Re: PLEASE HELP sp606 w/ midi controller

21 May 2008, 07:38
Read the manual, p. 78! The pad banks are spread across 8 adjacent MIDI channels.

Pad banks 1-4 are on the MIDI base channel (which can be set to ch 1-9; default is ch 1).

Banks 5-8 are on the next higher channel, then banks 9-12 on the next higher channel, etc. until you get to banks 29-32 seven channels higher than the base channel.

← Back to Grooveboxes