Fantom-S and Fantom-X

Saving sample to pad

Saving sample to pad

10 Jul 2007, 08:56
A "I feel dumb for asking" kinda question on something that I've done a few months ago and now when I need to do it again I'm pulling a blank...here is my question.

I've made a sample and I've gone thru the steps to get it to load to a pad for triggering, but when I turn the X6 off and then back on again the sample is no longer loaded on that pad and I have to go thru the whole process again.....how do I save it to a pad and then still have it on that pad when I re-start the keyboard?

thanks in advance.

Re: Saving sample to pad

10 Jul 2007, 09:38
What's up buck40? You need to make sure you write the settings to its own patch. Hope that does it. If not repost and I'll go over it on mine and walk you through it. May take a while,I have to go to work soon. Good luck.

wudsiba
Fantom X6
Audio exp.
wudsiba
Fantom X6
Audio exp.

Re: Saving sample to pad

17 Jul 2007, 15:25
so if I just try to save the sample to a pad while its still in the sample library without first saving the sample as a patch that it won't save its self perminantly on that pad?....is there someplace in the manual that this procedure is mentioned or shown?

← Back to Fantom-S and Fantom-X