dexter:
Check
here for the procedure.
Ambricosa:
Just to make sure I've got the facts straight. . . You're running Windows XP (I assume), and the Fantom shows up in Windows as a removable drive when you go to USB Storage (MEnu>USB Storage). Please verify this before trying what follows. . .
Remember, in order to change from Storage to Midi mode, you go to Menu>System>USB.
You will not see the Fantom as a drive in Windows while in this mode. Use the dec/inc buttons to change the mode. When told to disconnect before changing, ignore this and change anyway. I do it all the time.
Open the Editor and go to Setup. Let me know if you see the Fantom as an option.
I recreated your problem and the message you were getting by opening and closing the Editor, then opening the Librarian. I got the message in the Librarian, though this doesn't matter. the connectivity is the same.
I got rid of the problem by verifying my connectivity in USB Storage mode and seeing the drive in windows. I exited this and went to Menu>System>USB. Change to MIDI storage mode. Opened the Librarian and did the setup. No problem.
So give it a try.
1.) Connect via Menu>USB storage and verify the Drive in Windows.
2.) Exit
3.) Go to Menu>System>USB
4.) Change to MIDI mode, disregarding disconnect message.
5.) Bring up the Editor
Let us know what you get.
Edit: The procedures above were from my X6. Menu prompts may be different on your XA, but the principle is the same.
Bassman